Heavy-gauge, made-to-order livestock feeding equipment and gates — the run-of-the-mill essentials every working yard depends on, built from proper steel to outlast the cheap imports. Based in the Staffordshire Moorlands, we supply farms across Cheshire, Warrington, Jodrell Bank and the wider North West.
Cattle feed barriers (with timber skirt)
Our best-selling barrier — recent sets have gone out to a new shed build near Jodrell Bank and a farm over towards Warrington. Choose drilled holes for bolting to fixed uprights, eyelets for drop-peg fixing, or telescopic ends for sliding between girders.
- 20ft spans in 60×40×3mm box steel — 3mm to beat long-term sag
- 15ft spans in 60×40×2.5mm — lighter and lower cost, easier to handle
- 16in heavy-duty timber bottom skirt
- 1.40m overall height
Standard feed fences (no skirt)
For fixed shed positions — these bolt straight in, with telescopic or eyelet ends, in 10ft, 15ft and 20ft or any length you need.
- Diagonal bars at 17in centres
- Straight verticals at 13in centres
- Spacing tailored tighter to safeguard young stock
Two-in-one feed bunkers
Routine and hard-wearing. Standard 10ft and 15ft chassis; couple two 10ft twins for a 20ft run, with width and height to your spec.
Flat-pack galvanised bunkers
Where most suppliers ship bunkers fully welded, we send ours as precision-drilled, bolt-together panels — far lower freight costs, and panels that are easy to move around a tight farmyard before a quick bolt-up on site.
- 5ft, 10ft, 15ft and 20ft lengths
- Full hot-dip galvanised finish
Deer & security gates
For safeguarding livestock and securing compounds alike. Universal hanging works on the left or right-hand side, with a non-handed latch that works up or down.
- Widths: 4ft, 6ft, 8ft, 10ft and 12ft
- 6ft uniform height
